BHL-V Series Variable Speed Lathe
| MODEL | 1550V | |||
|---|---|---|---|---|
| Capacity | Height of centers | 190 (7.48") | ||
| Swing over bed | Ø380 (14.96") | |||
| Swing in gap | Ø610 (24") | |||
| Swing over cross slide | Ø238 (9.37") | |||
| Distance between centers | 1250 (50") | |||
| Width of bed | 280 (11") | |||
| Gap width in front of faceplate | 265 (10.43") | |||
| Headstock and Main Spindle | Spindle nose, internal taper | D1-6, MT. No. 6 | ||
| Spindle center sleeve | MT. No. 6 x MT. No. 4 | |||
| Spindle bore | Ø56 (2.2") | |||
| Spindle speed: Gear steps / Range |
4 steps | |||
| L | 22 ~ 72 R.P.M. | |||
| M | 70 ~ 235 R.P.M. | |||
| MH | 235 ~ 780 R.P.M. | |||
| H | 753 ~ 2500 R.P.M. | |||
| Infinitety variable | ||||
| Carriage | Length on bed / Width of carriage | 484 (19.05") / 450 (17.71") | ||
| Cross slide travel | 235 (9.25") | |||
| Top slide travel | 120 (4.72") | |||
| Threads and Feeds | Whitworth threads: Kinds / Range | 45 Kinds / 2 ~ 72 T.P.I. | ||
| Metric threads: Kinds / Range | 39 Kinds / 0.2 ~ 14 mm | |||
| D.P. threads: Kinds / Range | 21 Kinds / 8 ~ 44 D.P. | |||
| M.P. threads: Kinds / Range | 18 Kinds / 0.3 ~ 3.5 M.P. | |||
| Longitudinal feeds | 0.04 ~ 1.0 (0.0015" ~ 0.04") | |||
| Cross feeds | 0.02 ~ 0.5 (0.00075" ~ 0.02") | |||
| Tailstock | Quill diameter | Ø59 (2.322") | ||
| Quill travel | 127 (5") | |||
| Taper of center | MT. No. 4 | |||
| Motor | Main spindle Forced lubrication for headstock |
AC 5.5 kW (7.5 HP), Inverter 1/4 HP |
||
| Coolant pump | 1/8 HP | |||
| Measurement | Weight (Net / Gross) Approx. | 1450 kgs 1610 kgs |
||
| Packing sizes | Length | 2580 (101.58") | ||
| Width x Height | 1120 (44.1") x 1900 (74.8") | |||
Specifications subject to change without notice.
Standard Accessories：
- Backplate for 9" chuck
- Dead center MT. No. 4
- Center MT. No. 4 with carbide tip
- Spindle center sleeve MT. No. 6
- Level pads......8 pcs
- Tool set & Box
- Full length splash guard
- Operation manual & parts list
Optional Accessories：
Faceplate
4 & 3 Jaws Chuck
Chuck Safety Guards
5-Step Carriage Stop
5C Lever Type Collet Closer
Micrometer Carriage Stop
Drill Chucks
Digital Readout System (DRO)
LED Light
Quick Change Tool Post Set
Steady Rest
Follow Rest
Power Feed
Tool Post Safety Guard
Hand Wheel Cover
Telescopic Taper Attachment
- All castings are properly stabilized and stress relieved.
- Bed ways are hardened & ground to min. HRC 48-55.
- Turcite B coating between the bed and carriage.
- Extremely low noise level.
- Foot brake pedal provided.
- Built-in coolant pump & fitting provided.
- CSS (constant surface speed control) on request for E.V.S. model.
- Wider bed way which give absorbs vibration.
